Ships from USA

Driftless Outdoors Trading Co.™
← Back
Victron Cable fSmart BMS CL 12100 to MultiPlus  ASS070200100

Victron Cable f/Smart BMS CL 12-100 to MultiPlus [ASS070200100]

USD 13.60

Cable for Smart BMS CL 12-100 to MultiPlus This cable will allow the MultiPlus 500VA – 1600VA, MultiPlus Compact 800VA – 2kVA and MultiPlus-II models to be used with BMS products that have no VE.Bus interface, such as the Smart BMS CL 12-100 and the small BMS. These MultiPlus models can be controlled from the Load/Charge Disconnect outputs and Load/Charger outputs respectively. The cable must be wired to the remote on/off connector of the MultiPlus models: When used with the MultiPlus 500VA-1200VA models connect the black wire to the ON terminal and the red wire to the (+) terminal. When used with the MultiPlus Compact 800VA-2kVA models connect the black wire to the middle terminal and the red wire to the right (IN) terminal. When used with the MultiPlus-II models connect the black wire to the lower (-) terminal and the red wire to the upper (+) remote on-off terminal. Both the Load/Charge Disconnect outputs of Smart BMS CL 12-100 and Load/Charger outputs of the small BMS must be in ‘High’ state in order for the MultiPlus to operate. After shutdown due to low battery voltage, run the alternator or use a battery charger on the primary side of the BMS to reset the system. The MultiPlus will then switch on and start charging (if connected to an AC power source).Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)

Ships from the USA. Estimated delivery: typically 4-10 business days from the date of shipment.

In Stock

Shipping costs are calculated at checkout.
Secure checkout
Returns accepted within 30 days on eligible items. Restocking fee and return shipping apply. See Shipping and Fees.

Victron Cable f/Smart BMS CL 12-100 to MultiPlus [ASS070200100]

$13.60